Schneider Electric TeSys Thermal Overload Relay 2.5-4A Class 10A

Product Code LRD08 TE

Available for Delivery only, change to Fast Delivery Service

£39.79

exc VAT

£47.75 : inc VAT

£47.75

inc VAT

£39.79 : exc VAT

Qty:

Schneider Electric LRD08: TeSys Deca thermal overload relay with a 2.5-4A adjustable setting and Class 10A tripping, for protection of 3-phase motors rated 1.1-1.5kW at 400V.

Differential Overload & Phase Failure Protection

As a differential thermal overload relay, the LRD08 detects both overload conditions and load unbalance, tripping at 130% of the set current (Ir) on two phases when the third phase falls to zero. This gives early detection of phase failure before it damages the motor.

Manual Control & Fault Signalling

A thermal adjustment dial sets the trip current between 2.5A and 4A, while a manual-automatic reset selector and test button let you simulate a trip to check correct operation. A flag indicator shows trip status at a glance, and 2 auxiliary contacts (1NO+1NC) carry fault signals back to a control panel or PLC. Settings are protected by a transparent cover that can be locked with a seal.

Flexible Mounting

The relay mounts directly under TeSys LC1D09, LC1D12, LC1D18, LC1D25, LC1D32 and LC1D38 contactors via screw clamp terminals. It can also be mounted separately on DIN rail or by screw fixing using a LAD7B106 terminal block, ordered separately.

Multi-Standard Certification

Certified to IEC, UL, CSA, CCC, EAC and ATEX requirements, plus marine classification society approvals (BV, RINA, DNV-GL, LROS), and compliant with RoHS and REACh under Schneider Electric's Green Premium programme.

Key Features of the Schneider Electric TeSys Deca LRD08 Thermal Overload Relay Include:

  • Differential Thermal Overload Relay With Phase Failure And Load Unbalance Detection
  • Thermal Setting Range 2.5-4A, Adjustable Via Dial
  • Tripping Class 10A Conforming To IEC 60947-4-1
  • Tripping Threshold 1.14 ±0.06 Ir Conforming To IEC 60947-4-1
  • Phase Failure Sensitivity: Tripping Current 130% Of Ir On Two Phases, The Last At 0
  • Manual-Automatic Reset Selector With Test Button For Trip Simulation
  • Flag Indicator Shows Trip Status
  • 2 Auxiliary Contacts (1NO+1NC) For Remote Fault Signalling
  • Rated Operational Voltage (Ue): 690V AC, 0-400Hz For Power Circuit (IEC 60947-4-1)
  • Rated Insulation Voltage (Ui): 600V (UL/CSA), 690V (IEC 60947-4-1)
  • Rated Impulse Withstand Voltage (Uimp): 6kV
  • Direct Mounting Under TeSys LC1D09, LC1D12, LC1D18, LC1D25, LC1D32 And LC1D38 Contactors
  • Also Mountable On DIN Rail Or By Screw Fixing Using LAD7B106 Terminal Block (Ordered Separately)
  • Screw Clamp Terminal Connections: Power Circuit 1.5-10mm² Flexible; Control Circuit 1-2.5mm² Flexible
  • IP20 Degree Of Protection (IEC 60529)
  • Ambient Operating Temperature -20°C To 60°C Without Derating
  • Storage Temperature -60°C To 70°C
  • Height: 66mm
  • Width: 45mm
  • Depth: 70mm
  • Net Weight: 0.124kg
  • Multi-Standard Certified: IEC, UL, CSA, CCC, EAC, ATEX, BV, RINA, DNV-GL, LROS, UKCA
  • Green Premium Compliant (RoHS/REACh)
  • Warranty: 18 Months
Model Number: LRD08
Brand: Schneider Electric
Range: TeSys / TeSys Deca
Product Type: Differential Thermal Overload Relay
Device Short Name: LRD
Relay Application: Motor Protection
Product Compatibility: LC1D09, LC1D12, LC1D18, LC1D25, LC1D32, LC1D38
Network Type: AC, DC
Thermal Overload Class: Class 10A conforming to IEC 60947-4-1
Thermal Protection Adjustment Range: 2.5-4A
Rated Insulation Voltage (Ui): 600V (UL/CSA), 690V (IEC 60947-4-1)
Rated Operational Voltage (Ue): 690V AC, 0-400Hz for power circuit, conforming to IEC 60947-4-1
Network Frequency: 0-400Hz
Mounting Support: Plate, Rail, Under Contactor
Mounting Method: Direct Attachment
Tripping Threshold: 1.14 ±0.06 Ir conforming to IEC 60947-4-1
Auxiliary Contact Composition: 1NO + 1NC
Number Of Auxiliary Contacts (Normally Open): 1
Number Of Auxiliary Contacts (Normally Closed): 1
Number Of Auxiliary Contacts (Change-Over): 0
Conventional Free Air Thermal Current (Ith): 5A for signalling circuit
Permissible Current: 3A at 120V AC-15; 0.22A at 125V DC-13 (signalling circuit)
Associated Fuse Rating: 4A gG; 4A BS (signalling circuit)
Rated Impulse Withstand Voltage (Uimp): 6kV
Phase Failure Sensitivity: Tripping current 130% of Ir on two phases, the last one at 0
Control Type: Red push-button (stop), Blue push-button (reset)
Type Of Electrical Connection (Main Circuit): Screw connection
Connections (Control Circuit): Screw clamp terminals, 2 cables 1-2.5mm² (flexible with/without cable end, solid without cable end)
Connections (Power Circuit): Screw clamp terminals, 1 cable 1.5-10mm² flexible without cable end / 1-4mm² flexible with cable end / 1-6mm² solid without cable end
Tightening Torque: 1.7N.m (control and power circuits)
Temperature Compensation: -20°C to 60°C
Height: 66mm
Width: 45mm
Depth: 70mm
Net Weight: 0.124kg
Climatic Withstand: Conforming to IACS E10
IP Degree Of Protection: IP20 conforming to IEC 60529
Ambient Air Temperature (Operation): -20°C to 60°C without derating, conforming to IEC 60947-4-1
Ambient Air Temperature (Storage): -60°C to 70°C
Flame Retardance: V1 conforming to UL94
Mechanical Robustness: Vibrations 6Gn (IEC 60068-2-6); Shocks 15Gn for 11ms (IEC 60068-2-7)
Dielectric Strength: 1.89kV at 50Hz conforming to IEC 60947-1
Standards: EN/IEC 60947-4-1, EN/IEC 60947-5-1, UL 60947-4-1, UL 60947-5-1, CSA C22.2 No 60947-4-1, CSA C22.2 No 60947-5-1, GB/T 14048.4, GB/T 14048.5, EN 50495
Product Certifications: IEC, UL, CSA, CCC, EAC, BV, RINA, DNV-GL, LROS, ATEX INERIS, UKCA
Warranty: 18 Months
Lifecycle Status: Active

Recommended Products