Schneider Electric TM3DQ8R: Modicon TM3 discrete output module with 8 relay outputs, 240V AC / 30V DC rating, for expansion on Modicon M221, M241, M251 and M262 controllers.
Flexible Output Wiring
The 8 relay outputs support positive or negative logic, letting the module be wired as sink or source depending on the connected load. Each output is rated 2000mA, with a minimum switching current of 10mA at 5V DC for compatibility with low-power signalling circuits.
Controller Range Compatibility
Designed for the Modicon TM3 expansion architecture, this module extends I/O on Modicon M221, M241, M251 and M262 controllers, allowing additional relay outputs to be added to an existing Modicon system.
Installation and Status Monitoring
Wiring connects via an 11 x 2.5mm² removable screw terminal block with 5.08mm pitch adjustment, accepting 0.2...2.5mm² (24 AWG...14 AWG) solid cable. A green LED per channel gives local status signalling for each output, and the module mounts to TH35-15 or TH35-7.5 top hat DIN rail, or to a plate or panel with a fixing kit.
Safety Reliability
Isolation between channels and the bus is rated at 500V AC, with insulation between output and supply at 1500V AC and between output and internal logic at 500V AC. Mechanical durability is rated at 20,000,000 cycles, and the module carries an IP20 degree of protection.
Key Features of the Schneider Electric Modicon TM3DQ8R Include:
- 8 Relay Normally Open Outputs With Positive Or Negative Logic
- Discrete Output Voltage: 240V AC / 30V DC For Relay Outputs
- Discrete Output Current: 2000mA Per Relay Output
- Minimum Switching Current: 10mA At 5V DC
- Response Time: ≤10ms Maximum (Turn On), ≤5ms Maximum (Turn Off)
- Mechanical Durability: 20,000,000 Cycles
- Compatible With Modicon M221, M241, M251 And M262 Schneider Miniature Circuit Breaker Range Controllers
- Powered By Internal Bus: 40mA At 5V DC, 30mA At 24V DC
- Electrical Connection: 11 x 2.5mm² Removable Screw Terminal Block, 5.08mm Pitch
- Maximum Cable Distance: <30m (Unshielded Cable) For Relay Output
- Isolation Between Channels And Bus: 500V AC
- 1 Green LED Per Channel For Output Status
- Housing Colour: Grey
- Mounts To TH35-15 Or TH35-7.5 Top Hat DIN Rail (IEC 60715) Or Plate/Panel With Fixing Kit
- Height: 90mm
- Width: 27.4mm
- Depth: 84.6mm
- Net Weight: 0.11kg
- IP Degree Of Protection: IP20
- Ambient Air Temperature For Operation: -10°C...35°C (Vertical Installation), -10°C...55°C (Horizontal Installation)
- Ambient Air Temperature For Storage: -25°C...70°C
- Product Certifications: CE, CULus, UKCA, RCM, EAC, CULus HazLoc
- Standards: IEC 61131-2
- Warranty: 18 Months