Schneider Electric A9C20834: Acti9 iCT 4 Pole 25A Modular Contactor with 4NO contacts, 220-240V AC control voltage and clip-on DIN rail mounting.
Part of Schneider Electric's Control & Command range within the Acti9 family, the iCT is built for power circuit control and is suited to distribution board installation as a contactor for motor, heating and lighting applications.
Flexible Auxiliary Combination
The iCT uses a simple clip-on system for combining auxiliaries, letting installers configure the unit directly on a 35mm symmetrical DIN rail without extra tooling.
Remote Switching for Motors, Heating & Lighting
Designed for motor-heating-lighting duty, this contactor is suited to remote switching of small motors such as fans and mixers, as well as HVAC system control circuits. Control is remote with a maintained control signal, and the device is rated for up to 100 switching operations per day.
Compliance & Protection
Compliant with IEC/EN 61095, the iCT carries an IP20 degree of protection, a rated insulation voltage (Ui) of 500V AC and a rated impulse withstand voltage (Uimp) of 4kV, supporting its use as a contactor for distribution board installation.
Key Features of the Schneider Electric Acti9 iCT A9C20834 Include:
- Flexible Clip-On Auxiliary Combination For Simple Assembly
- Suitable For Remote Switching Of Small Motors, Fans, Mixers And HVAC Systems
- 4 Pole, 4NO Contact Configuration
- Rated Operational Current: 25A (AC-7A), 8.5A (AC-7B)
- Control Circuit Voltage (Uc): 220-240V AC
- Rated Operational Voltage (Ue): 400V AC
- Rated Insulation Voltage (Ui): 500V AC
- Rated Impulse Withstand Voltage (Uimp): 4kV
- Maintained Control Signal With Action Indicator
- Switching Frequency: Up To 100 Operations/Day
- Mechanical Durability: 1,000,000 Cycles
- Electrical Durability: Up To 100,000 Cycles (AC-7A)
- IP20 Degree Of Protection
- Compliant With IEC/EN 61095
- Clip-On Mounting On 35mm Symmetrical DIN Rail
- Height: 81mm
- Width: 36mm
- Depth: 60mm
- Colour: White
- Warranty: 18 Months