Danlers CEFLPIR10A 10A PIR Detector Flush Ceiling Mounted 2500W White

Danlers 10 Amp flush mounted PIR switch for the automatic control of lighting heating and ventilation loads. Designed for a suspended or plasterboard ceiling. Comes complete with 2m of cable for a quick and easy installation. Requires a 63 or 64mm ceiling cut-out. Suitable for use in meeting rooms, corridors and offices.

• Type of detector: Passive infrared occupancy sensor
• Application: Suspended ceiling, corridors, offices
• Mounting: Ceiling flush
• Detection zone and range: 360 degree, 7m at 2.4m high
• Maximum halogen and Incandescent load: 10 Amp or 2500 Watt
• Maximum resistive load: Up to 10A or 2500W 
• Maximum fluorescent load: Up to 10A or 2500W 
• Maximum 3 amps (750W) of LED lighting, electronic and wire wound transformer loads
• Maximum 1A (250W) of fans
• Voltage: 230 Volt AC 50Hz
• Protection rating: IP20
• Lux adjustment: 30 to 1000 lux plus inactive mode
• Time lag range: 10 seconds to 40 minutes in 9 steps
• Ceiling cut out: 64mm
• Dimensions: Diameter 72mm, Height 68mm
• Colour: White
• Made in the UK
• IP rating: IP44 (zones 2 and 3)
• Standards: BS EN 60669-2-1, CE approved
• Guarantee: 5 years