We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
CP Electronics EBDSPIR-PRM 10A PIR Detector Ceiling Mounted
£88.20
£73.50
In stock
Code
EBDSPIRPRM
CP Electronics 8 Amp PIR detector can either be flush mounted into a ceiling tile or surface mounted with the DBB mounting box. Simple plug in connections reduce installation time. Device can also be configured via an optional remote control UHS7, save time on site if there are more than one to set up.
- Type of detector: Passive infrared sensor
- Application: Suspended ceiling, corridors, offices, toilets
- Mounting: Flush 64mm cut out, or surface with DBB
- Detection zone and range: 360 degree, 7m at 2.8m high
- Maximum halogen and incandescent load: 10 Amp
- Maximum fluorescent load: 10 Amp
- Maximum compact fluorescent load: 10 Amp
- Maximum LED load: 10 Amp
- Maximum resistive load: 10 Amp
- Voltage: 230 Volt AC 50Hz
- Power consumption: 898mW
- Protection rating: IP40
- Photocell: Adjustable lux sensing
- Time lag range: 10 seconds to 99 minutes
- Dimensions: Diameter 76mm, Height 65mm
- Colour: White
- Standards: EMC-2014/30/EU, LVD-2014/35/EU
- Warranty: 5 Years
| Model Number | EBDSPIR-PRM |
|---|---|
| Brand | CP Electronics |
| Application | Flush Mounted |
| Amperage | 10A |
| Colour | White |
| Detection Angle | 360 |
| Detection Distance | 7M |
| Lux Rating | Adjustable |
| Time Lag Range | 10sec - 99mins |
| Resistive Rating | 2500W |
| Flu Rating | 2500W |
| Compact Fluorescent Rating | 2500W |
| LED Rating | 2500W |
| Cut Out | 64mm |
| Voltage | 230V |
| IP Rating | IP40 |
| Height | 69mm |
| Diameter | 76mm |
| Manufacturer Guarantee | 1 Year |
Write Your Own Review
Related Products
