Aico Ei3024 Multi Sensor Smoke and Heat Detector Mains with SmartLINK
Aico 3000 Series Ei3024 multi sensor alarm from the Aico 3000 series, optical smoke alarm and heat detector in one. Detects all fire types from smouldering fires to sudden rises in room temperature, designed to be used as an early warning alarm in any room including bedrooms or any room adjacent to a kitchen or garage. The Aico Ei3024 should not directly be used in a kitchen, the optical sensor could be triggered causing false alarms from burnt toast etc.
Aico mains powered smoke detector with 10 year tamperproof rechargeable lithium battery backup. Can be interconnected to new or existing Aico smoke alarms wired with a 3 core and earth cable or wirelessly connected by radio frequency using the Aico SmartLINK Ei3000MRF plug in module (remotely connect up to 12 alarms or devices). Compatible with previous Aico alarms that are either hard-wired, RadioLINK and RadioLINK+ or hybrid interconnecting systems.
The Ei3024 self-checks its sensor to ensure that it's always fully functioning and will alert you through LED flashes and/or audible beeps if there is a fault. However, if that's not enough you can test the alarm through the test button, which can be used as a silence button if there is a false alarm.
SmartLINK technology - Using the Aico Ei3000MRF module landlords or users can remotely download alarm information or be notified of triggered alarms over WIFI via the Aico Gateway and Portal system.
AudioLINK technology - Extract data to your smartphone or tablet via a free App, hold your smartphone next to the alarm to audibly download alarm information.
Extracted Data Includes:
- Alarm activations
- Sensor status
- Record of testing
- Battery and back up cell status
- Advice on dust contamination levels
Data is stored for the life of the alarm providing a valuable historical record. The Alarm Status Report also provides required evidence for the maintenance of records log that is required for Private Landlords renting out properties in England. Handy, the Report can also be emailed to form part of a properties record.
- Designed for use in any room alongside a kitchen or garage
- Combined optical smoke alarm and heat detector
- Mains powered with battery back up
- Can be interconnected wired or wirelessly with EI3000MRF
- Test Button
- Silence button
- Green LED indicates mains power connection
- Red LED indicates pre-alarm, silence mode, memory or battery event
- Yellow LED indicates a fault event
- Simple to install, easy fit base included
- Maximum operating temperature is 0° to 40°
- Maximum operating humidity 15% to 95%
- Sound level: 85dB(A) at a 3M
- Diameter: 150mm
- Depth: 66mm
- Voltage: 230V
- Guarantee: 5 years
If you perhaps have a large project enquiry or require further information please contact us.
|Type||Smoke Detector, Heat Detector|
|Application||Bedroom, Hallway, Landing, Living Room, Dining Room, Loft Conversion|
|Sensor Type||Multi Sensor, Optical - Smouldering Fires, Heat - Rate of Heat Rise|
|Supply||Mains with Battery Back Up|
|Data Extraction||WIFI, Radio Frequency|
|Manufacturer Guarantee||5 years|
SmartLINK - The next generation of Radio Frequency Wireless Interconnection, no need for tricky cable runs. Just buy the plug in module for the AICO 3000 Series and wirelessly connect up to 12 smoke heat or carbon monoxide detectors (backwards compatible with RadioLINK and hybrid Aico systems).
Real-time Notifications - Alarm activations and the current alarm status. Ideal for landlords and other users.
Data extraction - Download historical records required for evidence for the maintenance of records log required by law for Private Landlords.